IT之家 7 月 12 日消息，iFixit 现已对任天堂 Switch 2 Pro 手柄进行拆解，认为这款手柄难以维修，建议用户可以选择更容易维修、更便宜的替代品。
根据 iFixit 的拆解报告，若用户想要维修最常出问题的部件（例如电池），则必须将整个 Switch 2 Pro 手柄彻底拆解，首先需要撬开顶部用胶水固定的面板，拧去螺丝，接着还要拆掉手柄主板并卸下肩键才能接触到电池。
而在摇杆方面，iFixit 本次拆解也实锤了 Switch 2 Pro 控制器的摇杆设计与 Joy-Con 2 相同，同样并未使用霍尔摇杆，因此相应产品摇杆将会随着时间出现漂移现象，进一步降低相应产品的可持续性。
同时考虑到相应手柄难以拆解维修，因此 iFixit 建议用户可以选购配置更强、质量更高、更容易维修、价格更低的第三方替代品（IT之家注：Switch 2 Pro 手柄港版 538 港币，现汇率约合 492 元人民币）。
Disclaimer: Investing carries risk. This is not financial advice. The above content should not be regarded as an offer, recommendation, or solicitation on acquiring or disposing of any financial products, any associated discussions, comments, or posts by author or other users should not be considered as such either. It is solely for general information purpose only, which does not consider your own investment objectives, financial situations or needs. TTM assumes no responsibility or warranty for the accuracy and completeness of the information, investors should do their own research and may seek professional advice before investing.