超九成线路途经水域 千万吨级原油管道如何穿越?

环球时报
Aug 13

本文转自【央视新闻客户端】;

今天(13日),我国“十五五”开局投产的首条千万吨级原油管道——连云港至仪征原油管道工程的首段——连淮段投产成功。

连云港至仪征原油管道穿行于苏北水网地带,全线超九成线路途经水域,施工难度位居国内同类管道前列。

连仪管道连淮段途经连云港东南部及淮安东北部平原,全线水网线路长达138公里,占线路总长度的95%以上。在江苏省北部,新沂河及灌河穿越是全线最长、技术难度最高的控制性工程,是决定全线贯通进度的核心节点。

国家管网集团建设项目管理公司江苏项目分部经理 文运明:我们创新采用“定向钻+内滩连头+定向钻”的组合穿越工艺,单段穿越长度约5.7公里,比计划提前12天打通了全线贯通的关键通道。

建设期间,管道累计穿越大中型水域9条、小型河流439处,穿越铁路、公路共14处,给施工作业带来了极大挑战。

国家管网集团建设项目管理公司江苏项目分部经理 文运明:为最大限度减少对地表生态、水系环境的影响,项目全线优先采用定向钻穿越工艺,累计实施69条定向钻作业,穿越总里程达47.68公里。

Disclaimer: Investing carries risk. This is not financial advice. The above content should not be regarded as an offer, recommendation, or solicitation on acquiring or disposing of any financial products, any associated discussions, comments, or posts by author or other users should not be considered as such either. It is solely for general information purpose only, which does not consider your own investment objectives, financial situations or needs. TTM assumes no responsibility or warranty for the accuracy and completeness of the information, investors should do their own research and may seek professional advice before investing.

Most Discussed

  1. 1
     
     
     
     
  2. 2
     
     
     
     
  3. 3
     
     
     
     
  4. 4
     
     
     
     
  5. 5
     
     
     
     
  6. 6
     
     
     
     
  7. 7
     
     
     
     
  8. 8
     
     
     
     
  9. 9
     
     
     
     
  10. 10