台积电 A16 1.6nm 工艺预计 2026 年四季度量产

链捕手
Aug 21

ChainCatcher 消息,据 Liberty Times 等媒体报道,台积电已完成 angstrom 级 A16(1.6nm)制程的开发与验证,预计将于 2026 年第四季度进入大规模量产。该工艺采用台积电背面供电网络技术 Super Power Rail(SPR),将信号布线与电源布线分离,电源位于晶圆背面,以减少瓶颈。

与 2nm 工艺相比,A16 据称可提升 8% 至 10% 的计算速度,降低 15% 至 20% 的能耗,并提高 8% 至 10% 的芯片密度。台积电将 1.6nm 工艺视为迈向 1.4nm 的过渡步骤,目标是在 2028 年开始 1.4nm 量产。

Disclaimer: Investing carries risk. This is not financial advice. The above content should not be regarded as an offer, recommendation, or solicitation on acquiring or disposing of any financial products, any associated discussions, comments, or posts by author or other users should not be considered as such either. It is solely for general information purpose only, which does not consider your own investment objectives, financial situations or needs. TTM assumes no responsibility or warranty for the accuracy and completeness of the information, investors should do their own research and may seek professional advice before investing.

Most Discussed

  1. 1
     
     
     
     
  2. 2
     
     
     
     
  3. 3
     
     
     
     
  4. 4
     
     
     
     
  5. 5
     
     
     
     
  6. 6
     
     
     
     
  7. 7
     
     
     
     
  8. 8
     
     
     
     
  9. 9
     
     
     
     
  10. 10