详解苹果首款折叠iPhone Duo铰链:设计、制造用上AI算法和3D打印

IT之家
Sep 10

IT之家 9 月 10 日消息,今天凌晨的“亮新篇,来耀眼”特别活动上,苹果正式发布了期待已久的首款折叠屏手机 iPhone Duo。新机带来了不少令人意外的技术,其中关键铰链的设计和制造甚至借助了 AI 与 3D 打印技术。

折叠结构本身意味着手机承受的磨损程度是传统设备的两倍,因此大多数折叠手机使用一段时间后都会出现明显劣化,耐用性也不及普通智能手机。

苹果称,为了应对折叠屏手机常见的磨损问题,iPhone Duo 在设计中加入了多项创新保护措施,其中就包括铰链。

苹果首席硬件官约翰尼 · 斯鲁吉在活动中解释道:“生产过程中,我们会利用 AI 算法,为每一个铰链精确匹配最合适的外壳,确保两者完美对齐;随后,共聚焦激光会逐步扫描每个组件的表面形貌,再通过 3D 打印最多 25 层定制光敏聚合物微层,消除残留的表面起伏。”

斯鲁吉还表示,iPhone Duo 采用了“可显著减少眩光和反射的特制纳米纹理表层”,同时使用多层层压结构提升机身耐用性。

据IT之家了解,iPhone Duo 多层显示结构还会在开合时相对滑动,以减少屏幕形变。铰链采用定制可变扭矩设计,并由磁铁辅助闭合;苹果还称屏幕刚性比行业内其他显示屏“高 40%”。

屏幕刚性可理解为材料或屏幕总成抵抗变形的能力,同样的按压、扭转或折叠受力下,刚性更高的屏幕通常弯曲更少、回弹更稳定。

Disclaimer: Investing carries risk. This is not financial advice. The above content should not be regarded as an offer, recommendation, or solicitation on acquiring or disposing of any financial products, any associated discussions, comments, or posts by author or other users should not be considered as such either. It is solely for general information purpose only, which does not consider your own investment objectives, financial situations or needs. TTM assumes no responsibility or warranty for the accuracy and completeness of the information, investors should do their own research and may seek professional advice before investing.

Most Discussed

  1. 1
     
     
     
     
  2. 2
     
     
     
     
  3. 3
     
     
     
     
  4. 4
     
     
     
     
  5. 5
     
     
     
     
  6. 6
     
     
     
     
  7. 7
     
     
     
     
  8. 8
     
     
     
     
  9. 9
     
     
     
     
  10. 10