七项建筑材料燃烧性能试验方法国家标准10月1日起实施

智通财经
Sep 28
【七项建筑材料燃烧性能试验方法国家标准10月1日起实施】记者今天了解到,市场监管总局批准发布的七项建筑材料燃烧性能试验方法推荐性国家标准,将于2026年10月1日起正式实施。该批标准围绕GB 8624—2025《建筑材料及制品燃烧性能分级》核心分级指标,覆盖多类关键试验维度,构成完整的建筑防火材料试验评价体系。七项标准各有侧重、配套衔接,覆盖不燃性、可燃性、难燃性、单体燃烧、铺地材料、燃烧热值、质量损失测定等核心试验场景。其中,《建筑材料不燃性试验方法》优化试验装置、温度控制,从温升、质量损失、有焰燃烧三个维度明确750℃高温条件下的判定指标,为A级不燃材料认定提供关键试验依据;《建筑材料可燃性试验方法》细化点火方式、火焰传播判定相关要求,完善常温常态条件下材料表面可燃性试验流程,增强对初期火灾风险的评估能力;《建筑材料难燃性试验方法》升级竖炉试验装置及判定准则,在原有火蔓延测试基础上增设量热装置,优化热释放测量模型,提升难燃材料试验评价科学性。其余四项标准分别为单体燃烧试验、铺地材料燃烧性能测定、燃烧热值测定、燃烧性能试验质量损失测定,分别针对墙角火模拟、地面建材评价、热值核算、燃烧质量损失检测等细分场景,优化校准程序、试验参数与计算方法,适配不同品类建筑材料、制品的检测评价需要。该批标准正式实施后,将与GB 8624—2025分级标准协同配套,进一步提升建筑材料燃烧性能分级的适用性、准确性和可操作性,为工程设计选材、产品研发检验、认证评价及监督执法提供统一的标准依据。

Disclaimer: Investing carries risk. This is not financial advice. The above content should not be regarded as an offer, recommendation, or solicitation on acquiring or disposing of any financial products, any associated discussions, comments, or posts by author or other users should not be considered as such either. It is solely for general information purpose only, which does not consider your own investment objectives, financial situations or needs. TTM assumes no responsibility or warranty for the accuracy and completeness of the information, investors should do their own research and may seek professional advice before investing.

Most Discussed

  1. 1
     
     
     
     
  2. 2
     
     
     
     
  3. 3
     
     
     
     
  4. 4
     
     
     
     
  5. 5
     
     
     
     
  6. 6
     
     
     
     
  7. 7
     
     
     
     
  8. 8
     
     
     
     
  9. 9
     
     
     
     
  10. 10