Provided by Tiger Trade Technology Pte. Ltd.

Camtek

147.79
-7.4000-4.77%
Post-market: 141.95-5.8400-3.95%19:53 EDT
Volume:309.09K
Turnover:46.17M
Market Cap:6.90B
PE:148.88
High:156.89
Open:156.89
Low:146.05
Close:155.19
52wk High:215.99
52wk Low:75.75
Shares:46.66M
Float Shares:29.11M
Volume Ratio:0.74
T/O Rate:1.06%
Dividend:- -
Dividend Rate:- -
EPS(TTM):0.9927
EPS(LYR):1.04
ROE:7.57%
ROA:7.08%
PB:10.10
PE(LYR):142.11

Loading ...

Company Profile

Company Name:
Camtek
Exchange:
NASDAQ
Establishment Date:
1987
Employees:
709
Office Location:
Ramat Gavriel Industrial Zone,P.O. Box 544,Migdal Haemek,Israel
Zip Code:
23150
Fax:
972 4 644 0523
Introduction:
Camtek Ltd., together with its subsidiaries, develops, manufactures, and sells inspection and metrology equipment for semiconductor industry. The company provides Eagle-i, a system that delivers 2D inspection and metrology capabilities; Eagle-AP, which addresses the advanced packaging market using software and hardware technologies that deliver superior 2D and 3D inspection and metrology capabilities on the same platform; and Golden Eagle, a panel inspection and metrology system to address the challenges fanout wafer level packaging applications. It also develops automatic defect classification, which provides automatic defect classification of color images utilizing deep learning techniques to reduce and eliminate manual verification. In addition, the company offers MicroProf AP, a wafer metrology tool for applications at 3D packaging process steps; MicroProf DI, an optical inspection tool that enables inspection of structured and unstructured wafers for manufacturing process; MicroProf FE, a 2D/3D wafer metrology tool that serve front end HVM fab; MicroProf FS, an wafer metrology tool configurable for wafer foundry; MicroProf PT for hybrid metrology applications to common panel sizes; MicroProf MHU metrology tool, a material handling unit for semiconductor, MEMS, sapphire, and LED industries; MicroProf TL, an optical surface measurement tool for fully automatic 3D surface measurements; MicroProf 100, a universal surface metrology tool for determination of topography and film and sample thickness; MicroProf 200, a measuring device for contactless and non-destructive characterization of surfaces and films; and MicroProf 300, a SurfaceSens technology for quality assurance, development, and manufacturing. It serves semiconductor manufacturers, outsourced semiconductor assembly and test, integrated device manufacturers, and wafer level packaging subcontractors. Camtek Ltd. was incorporated in 1987 and is headquartered in Migdal Haemek, Israel.

Directors

Name
Position
Lior Aviram
Director and Executive Chairman of the Board
Rafi Amit
Chief Executive Officer and Director
I Shih Tseng
Independent Director
Leo Huang
Independent Director
Moty Ben Arie
Lead Independent Director
Orit Stav
Independent Director
Yael Andorn
Independent Director
Yosi Shacham Diamand
Independent Director
Yotam Stern
Independent Director

Shareholders

Name
Position
Rafi Amit
Chief Executive Officer and Director
Ramy Langer
Chief Operating Officer
Moshe Eisenberg
Chief Financial Officer
Lior Aviram
Director and Executive Chairman of the Board
Orit Geva Dvash
Vice President - Human Resources